Fiber Laser Maintenance and Specifications
| Shop Area: Rapid Prototyping
Tool: Fiber Laser |
Procedure Number
MT 120-03, Rev. 0 |
Date
12/13/2023 |
General
Specifications for the 80W SFX Fiber laser.
Reference
Maintenance
List of Specifications
- SFX
- Controller: EZCAD2
- Lens: 475mm
Details
- Application: Laser Engraving
- Applicable Material: Acrylic, Crytal, Glass, Leather, MDF, Paper, plastic, Plexiglax, Plywood, Rubber, STONE, wood
- Laser Type: MOPA
- Engraving Speed: 0-500mm/s
- Graphic Format Supported: AI, PLT, DXF, BMP, Dst, Dwg, LAS, DXP
- Cooling Mode: Water Cooling
- Brand Name: shenhui
- Dimension(L*W*H): 190*155*108cm
- Laser Source Brand: EFR
- Guiderail Brand: PMI
- Control System Brand: Ruida
- Weight (KG): 400 KG
- Engraving Area: 130*90cm
Motors
The x,y, and z axes all use the same three phase stepper motor: 57BYGH350C (datasheet: http://www.promoco-motors.com/products/StepperMotors/57BYGH350%20Series.pdf)
Motor Driver
3ND583 microstepping driver (datasheet: http://www.leadshine.com/UploadFile/Down/3ND583d.pdf) set to 5000 steps/rev.
Laser Controller
Ruida RDC6445G running LightObject custom firmware version 15.01.22 (http://www.lightobject.info/viewtopic.php?f=55&t=4182).
Laser Power Supply
High voltage power supply, HY-DY13
END OF THE PROCEDURE