Cnc plasma maintenance and specifications

From vector-space.org
Revision as of 11:48, 8 February 2021 by Kbogacik (talk | contribs)
Jump to navigation Jump to search

Shop Area: Metal Shop

Tool: CNC Plasma Cutter

Requires in-person training: Yes 

Procedure Number

MT 130-05, Rev. 1

Date

2/8/2021

General

Langmuir Crossfire CNC Plasma Table. 

Razorweld plasma cutter.

 

Reference

Maintenance

Razorcut 45 Plasma Cutter

Exposure to extremely dusty, damp, or corrosive air is damaging to the welding/cutting machine. In order to prevent any possible failure or fault of this welding/ cutting equipment, clean the dust at regular intervals with clean and dry compressed air of required pressure.

Specifications

These are a few of the important details in regards to the Razorcut 45 Plasma Cutter.

Technical Data

Power Supply / Phases (V-Ph) 230v - 1 +/- 15%

Duty Cycle @ 104°F 30% @ 45Amps

Rated Power (KVA) 5.50

Output Current Range (A) Plasma 20-40

Rated Output Voltage (V) 96

Efficiency (%) 90

Insulation Class H

Protection Class IP21S

Plasma Arc Starting Piolt L/F

Air Flow Pressure (MPA) 0.5 (75 psi)

Air Flow Rate (CFM) 6.70

Cutting Thickness - Clean (Inch) 5/8

Cutting Thickness - Severance (Inch) 25/32

Dimensions (inch) 18.1" x 6.69" x 12.99"

Weight (Pounds) 20.2

Torch Type: TRF-45-6-CC1 Plasma torch

Kerf: The tip orifices focus the plasma stream to the work piece. It is important to use the correct size tip for the amperage being used, for example a tip with a 3/64" orifice is good for 0-40 amps whereas a 1/16" orifice is better for 40-80 amps

Air Pressure and Volume: The RazorCut45 air pressure is pre-set at 4.5 psi and requires a flow rate of 6.0 CF/M.

CROSSFIRE™ SPECIFICATIONS

  • Cutting Envelope Dimensions:25.3” (X) x 23.3” (Y) x 3.0" (Z)
  • Machine Weight:130 Pounds
  • Linear Bearing Type: Ball Bearing Carriages on Zinc-plated Steel Tube Rails
  • Stepper Motor Size: X-Axis 284 oz-in Y-Axis 425 oz-in
  • PC Interface: Windows USB
  • Mechanical Drive System:3/8”-8 4-Start ACME Lead Screws and Acetal Anti-Backlash Lead Nuts
  • Motion Accuracy:0.002” per 12” inches
  • Step Resolution:0.0005”
  • Maximum Cut Speed:300 ipm
  • Torch Height Control: Manual Torch Height Adjustment
  • Table Surface: Replaceable Steel Slats, 50mm wide x 3mm thick
  • Input Power: 110/220 VAC (selectable)

  

                                                      END OF THE PROCEDURE
Retrieved from "https://vector-space.org/wiki/index.php?title=Cnc_plasma_maintenance_and_specifications&oldid=480"