Fiber Laser Maintenance and Specifications: Difference between revisions
Jump to navigation
Jump to search
Aspontarelli (talk | contribs) No edit summary |
Aspontarelli (talk | contribs) |
||
| Line 27: | Line 27: | ||
*Dimension(L*W*H): 190*155*108cm | *Dimension(L*W*H): 190*155*108cm | ||
*Control System Brand: EZCAD | *Control System Brand: EZCAD | ||
*Weight (KG): | *Weight (KG): 110 KG | ||
*Engraving Area: | *Engraving Area: 175*175mm | ||
*Rotary Axis: D80 | |||
==Motors== | ==Motors== | ||
The x,y, and z axes all use the same three phase stepper motor: 57BYGH350C (datasheet: http://www.promoco-motors.com/products/StepperMotors/57BYGH350%20Series.pdf) | The x,y, and z axes all use the same three phase stepper motor: 57BYGH350C (datasheet: http://www.promoco-motors.com/products/StepperMotors/57BYGH350%20Series.pdf) | ||
Revision as of 11:03, 13 December 2023
| Shop Area: Rapid Prototyping
Tool: Fiber Laser |
Procedure Number
MT 120-03, Rev. 0 |
Date
12/13/2023 |
General
Specifications for the 80W SFX Fiber laser.
Reference
- Product page: https://www.sfxlaser.com/Desktop-20W-30W-JPT-MOPA-M7-Fiber-Laser-Engraver-Laser-Marking-Machine
Maintenance
List of Specifications
- SFX
- Controller: EZCAD2
- Lens: 175x175mm
Details
- Application: Laser Engraving
- Applicable Material:
- Laser Source: MOPA YDFLP-M7-M-R JPT MOPA M7
- Brand Name: SFX
- Dimension(L*W*H): 190*155*108cm
- Control System Brand: EZCAD
- Weight (KG): 110 KG
- Engraving Area: 175*175mm
- Rotary Axis: D80
Motors
The x,y, and z axes all use the same three phase stepper motor: 57BYGH350C (datasheet: http://www.promoco-motors.com/products/StepperMotors/57BYGH350%20Series.pdf)
Motor Driver
3ND583 microstepping driver (datasheet: http://www.leadshine.com/UploadFile/Down/3ND583d.pdf) set to 5000 steps/rev.
Laser Controller
Ruida RDC6445G running LightObject custom firmware version 15.01.22 (http://www.lightobject.info/viewtopic.php?f=55&t=4182).
Laser Power Supply
High voltage power supply, HY-DY13
END OF THE PROCEDURE