Fiber Laser Maintenance and Specifications: Difference between revisions

From vector-space.org
Jump to navigation Jump to search
Newer edit →

Aspontarelli (talk | contribs)

4 user groups
817 edits
VisualWikitext
Created page with "{| | width="33%" |'''Shop Area:''' Rapid Prototyping '''Tool:''' Fiber Laser | width="33%" |'''Procedure Number''' MT 120-03, Rev. 0 | width="33%" |'''Date''' 12/13/2023 |} =General= Specifications for the 80W SFX Fiber laser. =Reference= * =Maintenance= =List of Specifications= *SFX *Controller: EZCAD2 *Lens: 475mm '''Details''' *Application: Laser Engraving *Applicable Material: Acrylic, Crytal, Glass, Leather, MDF, Paper, plastic, Plexiglax, Plywood, Rubber, STONE..."
 
No edit summary
Line 14: Line 14:


=Reference=
=Reference=
*
*Product page: https://www.sfxlaser.com/Desktop-20W-30W-JPT-MOPA-M7-Fiber-Laser-Engraver-Laser-Marking-Machine
=Maintenance=
=Maintenance=
=List of Specifications=
=List of Specifications=
*SFX
*SFX
*Controller: EZCAD2
*Controller: EZCAD2
*Lens: 475mm
*Lens: 175x175mm
'''Details'''
'''Details'''
*Application: Laser Engraving
*Application: Laser Engraving
*Applicable Material: Acrylic, Crytal, Glass, Leather, MDF, Paper, plastic, Plexiglax, Plywood, Rubber, STONE, wood
*Applicable Material:  
*Laser Type: MOPA
*Laser Source: MOPA YDFLP-M7-M-R JPT MOPA M7
*Engraving Speed: 0-500mm/s
*Brand Name: SFX
*Graphic Format Supported: AI, PLT, DXF, BMP, Dst, Dwg, LAS, DXP
*Cooling Mode: Water Cooling
*Brand Name: shenhui
*Dimension(L*W*H): 190*155*108cm
*Dimension(L*W*H): 190*155*108cm
*Laser Source Brand: EFR
*Control System Brand: EZCAD
*Guiderail Brand: PMI
*Control System Brand: Ruida
*Weight (KG): 400 KG
*Weight (KG): 400 KG
*Engraving Area: 130*90cm
*Engraving Area: 130*90cm

Revision as of 10:36, 13 December 2023

Shop Area: Rapid Prototyping

Tool: Fiber Laser

Procedure Number

MT 120-03, Rev. 0

Date

12/13/2023

General

Specifications for the 80W SFX Fiber laser.

Reference

Maintenance

List of Specifications

  • SFX
  • Controller: EZCAD2
  • Lens: 175x175mm

Details

  • Application: Laser Engraving
  • Applicable Material:
  • Laser Source: MOPA YDFLP-M7-M-R JPT MOPA M7
  • Brand Name: SFX
  • Dimension(L*W*H): 190*155*108cm
  • Control System Brand: EZCAD
  • Weight (KG): 400 KG
  • Engraving Area: 130*90cm

Motors

The x,y, and z axes all use the same three phase stepper motor: 57BYGH350C (datasheet: http://www.promoco-motors.com/products/StepperMotors/57BYGH350%20Series.pdf)

Motor Driver

3ND583 microstepping driver (datasheet: http://www.leadshine.com/UploadFile/Down/3ND583d.pdf) set to 5000 steps/rev.

Laser Controller

Ruida RDC6445G running LightObject custom firmware version 15.01.22 (http://www.lightobject.info/viewtopic.php?f=55&t=4182).

Laser Power Supply

High voltage power supply, HY-DY13 

                                           END OF THE PROCEDURE
Retrieved from "https://vector-space.org/wiki/index.php?title=Fiber_Laser_Maintenance_and_Specifications&oldid=1457"