Cnc plasma maintenance and specifications: Difference between revisions
Jump to navigation
Jump to search
Aspontarelli (talk | contribs) |
Aspontarelli (talk | contribs) |
||
| Line 38: | Line 38: | ||
''' | '''Langmuir Crossfire''' | ||
* Cutting Envelope Dimensions:25.3” (X) x 23.3” (Y) x 3.0" (Z) | * Cutting Envelope Dimensions:25.3” (X) x 23.3” (Y) x 3.0" (Z) | ||
| Line 52: | Line 52: | ||
* Table Surface: Replaceable Steel Slats, 50mm wide x 3mm thick | * Table Surface: Replaceable Steel Slats, 50mm wide x 3mm thick | ||
* Input Power: 110/220 VAC (selectable) | * Input Power: 110/220 VAC (selectable) | ||
* Plasma Source: Lotus LTP5500D | |||
'''END OF THE PROCEDURE''' | '''END OF THE PROCEDURE''' | ||
Revision as of 11:57, 15 March 2022
|
Shop Area: Metal Shop Tool: CNC Plasma Cutter Requires in-person training: Yes |
Procedure Number MT 130-05, Rev. 1 |
Date 2/8/2021 |
General
We run a Lotos LTP5500 plasma cutter on the Langmuir Crossfire CNC plasma table.
Langmuir Crossfire CNC Plasma Table.
Reference
- https://www.langmuirsystems.com/troubleshooting
- https://www.langmuirsystems.com/crossfire/legacy
- https://unimig.com.au/wp-content/uploads/2019/08/RAZOR-CUT-45-Manual.pdf
Maintenance
Exposure to extremely dusty, damp, or corrosive air is damaging to the welding/cutting machine. In order to prevent any possible failure or fault of this welding/ cutting equipment, clean the dust at regular intervals with clean and dry compressed air of required pressure.
Specifications
Langmuir Crossfire
- Cutting Envelope Dimensions:25.3” (X) x 23.3” (Y) x 3.0" (Z)
- Machine Weight:130 Pounds
- Linear Bearing Type: Ball Bearing Carriages on Zinc-plated Steel Tube Rails
- Stepper Motor Size: X-Axis 284 oz-in Y-Axis 425 oz-in
- PC Interface: Windows USB
- Mechanical Drive System:3/8”-8 4-Start ACME Lead Screws and Acetal Anti-Backlash Lead Nuts
- Motion Accuracy:0.002” per 12” inches
- Step Resolution:0.0005”
- Maximum Cut Speed:300 ipm
- Torch Height Control: Manual Torch Height Adjustment
- Table Surface: Replaceable Steel Slats, 50mm wide x 3mm thick
- Input Power: 110/220 VAC (selectable)
- Plasma Source: Lotus LTP5500D
END OF THE PROCEDURE