Resin-printer-user-guide: Difference between revisions
Jump to navigation
Jump to search
Aspontarelli (talk | contribs) No edit summary |
Aspontarelli (talk | contribs) |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 22: | Line 22: | ||
Resin printers are used to produce highly detailed 3D prints. | Resin printers are used to produce highly detailed 3D prints. | ||
Vector Space has an Anycubic Photon resin printer. | Vector Space has an Anycubic Photon S resin printer. | ||
= Safety = | = Safety = | ||
| Line 31: | Line 31: | ||
= Reference = | = Reference = | ||
* https://store.anycubic.com/products/anycubic-photon- | * Photon S Product Page: https://store.anycubic.com/products/anycubic-photon-s | ||
* Photon User Manual: https://drive.google.com/file/d/ | * Photon S User Manual: https://drive.google.com/file/d/11FVhqu7mvZYCeqMA2UkqQhNRDr4s4g3b/view | ||
* General Resin Printing Guide: https://doc.mango3d.io/doc/j3d-tech-s-guide-to-resin-printing/post-processing/video-demo/ | |||
= Procedure = | = Procedure = | ||
# Model Prep: | |||
## Use Chitubox software to slice 3D model. | |||
## Transfer to printer using USB stick | |||
## Pour resin into vat about 1/3 full | |||
## Click Print on LCD screen | |||
# Model Cleanup and Curing: | |||
## Once the print is complete, unscrew (red knob) and remove the printing platform. | |||
## Remove part from print platform using plastic putty knife | |||
## Dunk part in mason jar of used Isopropyl Alcohol (IPA). | |||
## Carefully blow off IPA using compressed air. | |||
## Move part to Elegoo Wash station | |||
## Carefully blow off liquid using compressed air. | |||
## Move part to Elegoo Curing station<br /> | |||
= Troubleshooting = | = Troubleshooting = | ||
Latest revision as of 09:56, 5 August 2024
|
Shop Area: Rapid Prototyping Tool: Resin Printers Requires in-person training: No |
Procedure Number UG 120-10, Rev. 0 |
Date 6/17/2024 |
General
Resin printers are used to produce highly detailed 3D prints.
Vector Space has an Anycubic Photon S resin printer.
Safety
- Do not remove material from the printer before it has cooled.
- Clean up clutter, debris and flammable materials at the printer after use.
Reference
- Photon S Product Page: https://store.anycubic.com/products/anycubic-photon-s
- Photon S User Manual: https://drive.google.com/file/d/11FVhqu7mvZYCeqMA2UkqQhNRDr4s4g3b/view
- General Resin Printing Guide: https://doc.mango3d.io/doc/j3d-tech-s-guide-to-resin-printing/post-processing/video-demo/
Procedure
- Model Prep:
- Use Chitubox software to slice 3D model.
- Transfer to printer using USB stick
- Pour resin into vat about 1/3 full
- Click Print on LCD screen
- Model Cleanup and Curing:
- Once the print is complete, unscrew (red knob) and remove the printing platform.
- Remove part from print platform using plastic putty knife
- Dunk part in mason jar of used Isopropyl Alcohol (IPA).
- Carefully blow off IPA using compressed air.
- Move part to Elegoo Wash station
- Carefully blow off liquid using compressed air.
- Move part to Elegoo Curing station
Troubleshooting