Cnc router maintenance and specifications: Difference between revisions

From vector-space.org
Jump to navigation Jump to search
← Older edit

Aspontarelli (talk | contribs)

4 user groups
817 edits
VisualWikitext
 
(18 intermediate revisions by the same user not shown)
Line 18: Line 18:
= GENERAL =
= GENERAL =


Specifications for the Phoenix-GS5 CNC router and the Shapeoko 2 CNC router.
Specifications for the Phoenix-GS5 and the AXYZ 4008 CNC routers.
 
[[File:Shapeoko 2 – CNC Router.png]]


= REFERENCE =
= REFERENCE =
Line 34: Line 32:


* SheetCAM tutorials - https://arclightcnc.com/sheetcam-tutorials/
* SheetCAM tutorials - https://arclightcnc.com/sheetcam-tutorials/
=== AXYZ MDF Cover Replacement ===
The AXYZ vacuum table is covered by 3/4" MDF. In order to cover the full 5'x8' table surface, two sheets of MDF are required. We have designed a hold down system such that the two sheets of MDF are identical to one another and are made using a single CAM operation.
[[File:Mdf cover CAM.ngc|thumb]]


= List of Specifications =
= List of Specifications =


== Phoenix CNC Router ==
== Phoenix CNC Router ==
* KL-2200 Spindle: 3 phase, 2220 Watt, 400 hz
* KL-2200 Spindle: 3 phase, 2220 Watt (3HP), 400 hz
* [//store.mesanet.com/index.php?route=product/product&product_id=124&search=7i85 MESA-7i85 encoder] with [//store.mesanet.com/index.php?route=product/product&product_id=123&search=7i84 MESA-7i84 daughtercard]
* [//store.mesanet.com/index.php?route=product/product&product_id=124&search=7i85 MESA-7i85 encoder] with [//store.mesanet.com/index.php?route=product/product&product_id=123&search=7i84 MESA-7i84 daughtercard]
* [//www.geckodrive.com/amfile/file/download/file_id/15/product_id/35/ Gecko G320 servo drivers]
* X and Y motors: [//www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwjK5On80cPqAhW8knIEHShaCuYQFjACegQIBxAB&url=https%3A%2F%2Fdocs.rs-online.com%2F3ef3%2F0900766b80211175.pdf&usg=AOvVaw3QwEoog3jLHVgvXjFKsXDp MEI M644] gantry servo motors
* X and Y drivers: Leadshine DCS810
* Z motor: stepper
* Z driver: DM556T
* HY VFD, 240V
* HY VFD, 240V
* [//store.mesanet.com/index.php?route=product/product&product_id=55&search=5i25 Mesa-5i25] superport PCI card
* [//store.mesanet.com/index.php?route=product/product&product_id=55&search=5i25 Mesa-5i25] superport PCI card
* [//www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwjK5On80cPqAhW8knIEHShaCuYQFjACegQIBxAB&url=https%3A%2F%2Fdocs.rs-online.com%2F3ef3%2F0900766b80211175.pdf&usg=AOvVaw3QwEoog3jLHVgvXjFKsXDp MEI M644] gantry servo motors
 
=== Bed Dimensions ===
X-axis: -0.175 to 47.5"
 
Y-axis: -0.25 to 47.5"


== AXYZ CNC Router ==
== AXYZ CNC Router ==
=== Perske D68167 Spindle ===
7.7 HP spindle
OZ12/EOC12 collets
=== PVL 270B Vacuum Pump ===
=== PVL 270B Vacuum Pump ===
* 5.3 qt of DICREA 100 oil. Change every 500 hours
* 5.3 qt of DICREA 100 oil. Change every 500 hours
Line 54: Line 69:
=== 7i76e MESA controller ===
=== 7i76e MESA controller ===


=== PACSCI 6410 stepper drivers ===
=== Stepper drivers ===
There are 4 total drivers. One for the Y-axis, two for the X-axis, and one for the Z-axis.
 
There are 4 total stepper drivers. One for the Y-axis, two for the X-axis, and one for the Z-axis.
 
The Y and Z axes are controlled by PACSCI 6410 drivers.
https://www.electromate.com/pub/media/assets/catalog-library/pdfs/kollmorgen/Kollmorgen_6410_6415_Stepper_Drive_Catalog.pdf
https://www.electromate.com/pub/media/assets/catalog-library/pdfs/kollmorgen/Kollmorgen_6410_6415_Stepper_Drive_Catalog.pdf


=== Stepper Motors ===
DIP switch positions, described on pg C-10 of manual.
* Z1: DUUUUDDD
* X1: DUUUUDDD
* X2: DUUUUDDD
* Y1: DUDUUDDD
 
The X axis is controlled by two Gecko GR214V drivers.
https://www.geckodrive.com/gr214v-bulletproof-high-resolution-stepper-drive.html
 
The mismatch exists because one of the X-axis PACSCI drivers died and we replaced it with a more modern driver. These newer Gecko drivers are better in every way, and should eventually replace the remaining PACSCI drivers.
 
=== PST341-3A Stepper Motors ===
X-motors: AXYZ PST341-3A Stepping motor. Voltage 1.45V, 5.0 Amps, 1.8 Deg.
 
=== Z-axis ===
Stepper Motor:
Stepper Driver:
Drive pulley:
Driven Pulley:
Leadscrew:
Linear Bearings: AAD4K, 1622-81x-10, X=4
 
 
 


                                     '''END OF PROCEDURE'''
                                     '''END OF PROCEDURE'''

Latest revision as of 09:24, 5 January 2026

Shop Area: Woodshop

Tool: CNC Router

Requires in-person training: Yes 

Procedure Number

MT 110-08, Rev. 1

Date

1/26/2021

GENERAL

Specifications for the Phoenix-GS5 and the AXYZ 4008 CNC routers.

REFERENCE

Maintenance

See Links

AXYZ MDF Cover Replacement

The AXYZ vacuum table is covered by 3/4" MDF. In order to cover the full 5'x8' table surface, two sheets of MDF are required. We have designed a hold down system such that the two sheets of MDF are identical to one another and are made using a single CAM operation. File:Mdf cover CAM.ngc

List of Specifications

Phoenix CNC Router

Bed Dimensions

X-axis: -0.175 to 47.5"

Y-axis: -0.25 to 47.5"

AXYZ CNC Router

Perske D68167 Spindle

7.7 HP spindle

OZ12/EOC12 collets

PVL 270B Vacuum Pump

  • 5.3 qt of DICREA 100 oil. Change every 500 hours

X2C Inverter

7i76e MESA controller

Stepper drivers

There are 4 total stepper drivers. One for the Y-axis, two for the X-axis, and one for the Z-axis.

The Y and Z axes are controlled by PACSCI 6410 drivers. https://www.electromate.com/pub/media/assets/catalog-library/pdfs/kollmorgen/Kollmorgen_6410_6415_Stepper_Drive_Catalog.pdf

DIP switch positions, described on pg C-10 of manual.

  • Z1: DUUUUDDD
  • X1: DUUUUDDD
  • X2: DUUUUDDD
  • Y1: DUDUUDDD

The X axis is controlled by two Gecko GR214V drivers. https://www.geckodrive.com/gr214v-bulletproof-high-resolution-stepper-drive.html

The mismatch exists because one of the X-axis PACSCI drivers died and we replaced it with a more modern driver. These newer Gecko drivers are better in every way, and should eventually replace the remaining PACSCI drivers.

PST341-3A Stepper Motors

X-motors: AXYZ PST341-3A Stepping motor. Voltage 1.45V, 5.0 Amps, 1.8 Deg.

Z-axis

Stepper Motor: Stepper Driver: Drive pulley: Driven Pulley: Leadscrew: Linear Bearings: AAD4K, 1622-81x-10, X=4 



                                    END OF PROCEDURE
Retrieved from "https://vector-space.org/wiki/index.php?title=Cnc_router_maintenance_and_specifications&oldid=1895"