GENERAL

A guide for using the following 3D Printers:

Lulzbot TAZ6

REFERENCE

TBD

Lulzbot Mini
- Auto-bed leveling, auto-nozzle cleaning, an easy carry handle, new Cura software, and a low maintenance PEI print surface
- Print Volume: 6in x 6in x 6.2in (152mm x 152mm x 158mm). Layer resolution as fine as 50 micron and as coarse as 500 micron, depending on part geometry and speed/finish requirements
- Maximum temperatures of 300°C (572°F) for the hot end and 120°C (248°F) open a world of material possibilities.
- Top Print Speed: 275mm/sec (10.8 in/sec) at 0.18 mm layer height
- Modular tool head carriage design allows plug-and-play with different print heads for growing selection of 3D printing filament materials
- 3D printing software programs, Cura LulzBot Edition comes standard. Other compatible software includes OctoPrint, BotQueue, Slic3r, Printrun, MatterControl, etc.

Lulzbot TAZ6
- The TAZ 6 features an all-metal HotEnd.
- Machine comes standard with automatic bed leveling and self-cleaning capabilities.
- Print Surface: Heated borosilicate glass bed covered with PEI film
- Print Area: 280mm x 280mm x 250mm (11.02in x 11.02in x 9.8in)
- Top Print Speed: 200mm/sec (7.9in/sec)
- Print Tolerance: 0.1mm (0.0039in) in X and Y axes. Z axis is dependent on layer thickness
- Layer Thickness: 0.050mm – 0.50mm (0.002in – 0.02 in), Dependent on nozzle size
- Capable Materials: ABS, PLA, HIPS, PVA, wood filled filaments, Polyester (Tritan), PETT, bronze and copper filled filaments, Polycarbonate, Nylon, PETG, conductive PLA and ABS, UV luminescent filaments, PCTPE, PC-ABS.
- Filament Diameter: 3.00mm

Gigabot GB2
- Slic3r profile: https://github.com/re3Dprinting/Slic3r-Profiles/blob/main/GB2%20config.ini

                                    END OF PROCEDURE