Vinyl cutter training checklist

Shop Area: Rapid Prototyping Tool: Vinyl Cutter

Procedure Number TC 120-03, Rev. 0

Date 4/21/2021

GENERAL

Training to be completed prior to using the Vinyl Cutter.

SAFETY

See Vinyl Cutter User Guide UG-120-03 [File:https://vector-space.org/wiki/Vinyl_cutter_user_guide]

REFERENCE

• Vinyl Cutter User Guide UG-120-03 [File:https://vector-space.org/wiki/Vinyl_cutter_user_guide]

• Vinyl Cutter Maintenance and Specifications MT-120-03 [1]

• USCutter User Manual & Assembly Instructions   https://www.uscutter.com/static/PDFs/MH_Manual_09172019.pdf

• Roland SV-8.  https://www.totalinksolutions.com/products/stika-design-cutter-sv-8?variant=30299671953456&gclid=CjwKCAjw_sn8BRBrEiwAnUGJDo8uPrPyRxJjLj7fgeB8NmxIbE8IL8lDZWApqzIkErwcer6z2LBY5BoCKhYQAvD_BwE#

LISTING

√ Indicates review completed

	 Reviewed Vinyl Cutter User Guide UG-120-03 [File:https://vector-space.org/wiki/Vinyl_cutter_user_guide]
	 Conducted one-on-one training with Vector Space assigned Trainer
	 Understanding of safety requirements for operation of equipment
	 Discuss limitations of the Vinyl Cutter
	 Review settings of the Vinyl Cutter
	 Review Troubleshooting of the Vinyl Cutter
	 Reviewed Vinyl Cutter Maintenance and Specifications MT-120-03 [2]
	 Cleaning after use of the Vinyl Cutter

Training Completion:

Vector Space User:                              

Date training completed:                

Vector Space Trainer:                              

                               END OF THE PROCEDURE