Plasma cutter maintenance and specifications: Difference between revisions

From vector-space.org
Jump to navigation Jump to search
No edit summary
No edit summary
Line 25: Line 25:
= MAINTENANCE =
= MAINTENANCE =


= SPECIFICATION =
= LIST OF SPECIFICATIONS =
The RazorCut 45 is retrofit with a genuine IPT 60 torch.
The RazorCut 45 is retrofit with a genuine IPT 60 torch.


Line 43: Line 43:


80 amp tip - 1.3mm/.051" - 71 to 80 amps - 75 to 80 psi
80 amp tip - 1.3mm/.051" - 71 to 80 amps - 75 to 80 psi
= TROUBLESHOOTING =

Revision as of 11:48, 1 May 2021

Shop Area: Metal Shop

Tool: Plasma Cutter (handheld)

Requires in-person training: Yes

Procedure Number: UG 110-03, Rev. 1

Last Revision: 4/30/2021


GENERAL

The RazorCut 45 plasma cutter is used for making curved cuts in metal. It can cut up to 5/8" thick steel and 1/4" aluminum.


REFERENCE

Razor Cut 45 product page (http://razorweld.com/catalogue_product.asp?product=983&category=22&subcategory=87)

MAINTENANCE

LIST OF SPECIFICATIONS

The RazorCut 45 is retrofit with a genuine IPT 60 torch.

Recommended tip orifice sizes:

20 amp tip - 0.6mm/.025" - 15 to 20 amps - 50 to 55 psi

30 amp tip - 0.8mm/.030" - 21 to 30 amps - 55 to 60 psi

40 amp tip - 0.9mm/.035" - 31 to 40 amps - 65 to 70 psi

50 amp tip - 1.0mm/.040" - 41 to 50 amps - 65 to 75 psi

60 amp tip - 1.1mm/.044" - 51 to 60 amps - 65 to 75 psi

70 amp tip - 1.2mm/.047" - 61 to 70 amps - 75 to 80 psi

80 amp tip - 1.3mm/.051" - 71 to 80 amps - 75 to 80 psi