Plasma cutter maintenance and specifications: Difference between revisions
Aspontarelli (talk | contribs) (→Specs) |
Aspontarelli (talk | contribs) No edit summary |
||
(3 intermediate revisions by the same user not shown) | |||
Line 7: | Line 7: | ||
<span style="color:#FFFFFF;">'''<span style="background-color:#FF0000;">Requires in-person training:</span>'''<span style="background-color:#FF0000;"> Yes </span></span> | <span style="color:#FFFFFF;">'''<span style="background-color:#FF0000;">Requires in-person training:</span>'''<span style="background-color:#FF0000;"> Yes </span></span> | ||
'''Procedure Number''': | '''Procedure Number''': MT 110-03, Rev. 1 | ||
'''Last Revision:''' 4/30/2021 | '''Last Revision:''' 4/30/2021 | ||
Line 18: | Line 18: | ||
The RazorCut 45 plasma cutter is used for making curved cuts in metal. It can cut up to 5/8" thick steel and 1/4" aluminum. | The RazorCut 45 plasma cutter is used for making curved cuts in metal. It can cut up to 5/8" thick steel and 1/4" aluminum. | ||
= REFERENCE = | = REFERENCE = | ||
Line 24: | Line 23: | ||
Razor Cut 45 product page (http://razorweld.com/catalogue_product.asp?product=983&category=22&subcategory=87) | Razor Cut 45 product page (http://razorweld.com/catalogue_product.asp?product=983&category=22&subcategory=87) | ||
= | = MAINTENANCE = | ||
= LIST OF SPECIFICATIONS = | |||
The RazorCut 45 is retrofit with a genuine IPT 60 torch. | The RazorCut 45 is retrofit with a genuine IPT 60 torch. | ||
Recommended tip orifice sizes: | Recommended tip orifice sizes: | ||
20 amp tip - 0.6mm/.025" - 15 to 20 amps - 50 to 55 psi | 20 amp tip - 0.6mm/.025" - 15 to 20 amps - 50 to 55 psi | ||
30 amp tip - 0.8mm/.030" - 21 to 30 amps - 55 to 60 psi | 30 amp tip - 0.8mm/.030" - 21 to 30 amps - 55 to 60 psi | ||
40 amp tip - 0.9mm/.035" - 31 to 40 amps - 65 to 70 psi | 40 amp tip - 0.9mm/.035" - 31 to 40 amps - 65 to 70 psi | ||
50 amp tip - 1.0mm/.040" - 41 to 50 amps - 65 to 75 psi | 50 amp tip - 1.0mm/.040" - 41 to 50 amps - 65 to 75 psi | ||
60 amp tip - 1.1mm/.044" - 51 to 60 amps - 65 to 75 psi | 60 amp tip - 1.1mm/.044" - 51 to 60 amps - 65 to 75 psi | ||
70 amp tip - 1.2mm/.047" - 61 to 70 amps - 75 to 80 psi | 70 amp tip - 1.2mm/.047" - 61 to 70 amps - 75 to 80 psi | ||
80 amp tip - 1.3mm/.051" - 71 to 80 amps - 75 to 80 psi | 80 amp tip - 1.3mm/.051" - 71 to 80 amps - 75 to 80 psi | ||
Revision as of 12:48, 1 May 2021
Shop Area: Metal Shop Tool: Plasma Cutter (handheld) Requires in-person training: Yes Procedure Number: MT 110-03, Rev. 1 Last Revision: 4/30/2021 |
GENERAL
The RazorCut 45 plasma cutter is used for making curved cuts in metal. It can cut up to 5/8" thick steel and 1/4" aluminum.
REFERENCE
Razor Cut 45 product page (http://razorweld.com/catalogue_product.asp?product=983&category=22&subcategory=87)
MAINTENANCE
LIST OF SPECIFICATIONS
The RazorCut 45 is retrofit with a genuine IPT 60 torch.
Recommended tip orifice sizes:
20 amp tip - 0.6mm/.025" - 15 to 20 amps - 50 to 55 psi
30 amp tip - 0.8mm/.030" - 21 to 30 amps - 55 to 60 psi
40 amp tip - 0.9mm/.035" - 31 to 40 amps - 65 to 70 psi
50 amp tip - 1.0mm/.040" - 41 to 50 amps - 65 to 75 psi
60 amp tip - 1.1mm/.044" - 51 to 60 amps - 65 to 75 psi
70 amp tip - 1.2mm/.047" - 61 to 70 amps - 75 to 80 psi
80 amp tip - 1.3mm/.051" - 71 to 80 amps - 75 to 80 psi