Drum-sander: Difference between revisions
Jump to navigation
Jump to search
Line 18: | Line 18: | ||
= GENERAL = | = GENERAL = | ||
There are 2 lock bolts to the adjustment bolts to keep the current setting. Please DO NOT change these settings. There are guides lines on the front showing where the belt should run so it's obvious if it starts to track to the right and curl under which will grind the right roller and bed. If this happens please STOP since the belt is just a large sheet of sandpaper and it will grind out the entire roller support and permanently damage the machine.. | There are 2 lock bolts to the adjustment bolts to keep the current setting. Please DO NOT change these settings. There are guides lines on the front showing where the belt should run so it's obvious if it starts to track to the right and curl under which will grind the right roller and bed. If this happens please STOP since the belt is just a large sheet of sandpaper and it will grind out the entire roller support and permanently damage the machine.. | ||
[[File:Drum Bed.jpg]] | |||
= SAFETY = | = SAFETY = |
Revision as of 17:41, 22 February 2021
Shop Area: Woodshop Tool: Drum Sander Requires in-person training: Yes |
Procedure Number UG 110-01, Rev. 1 |
Date 1/10/2021 |
GENERAL
There are 2 lock bolts to the adjustment bolts to keep the current setting. Please DO NOT change these settings. There are guides lines on the front showing where the belt should run so it's obvious if it starts to track to the right and curl under which will grind the right roller and bed. If this happens please STOP since the belt is just a large sheet of sandpaper and it will grind out the entire roller support and permanently damage the machine..
SAFETY
REFERENCE
PROCEDURE
TROUBLESHOOTING
END OF THE PROCEDURE