Drum-sander: Difference between revisions

From vector-space.org
Jump to navigation Jump to search
Line 17: Line 17:


= GENERAL =
= GENERAL =
 
There are 2 lock bolts to the adjustment bolts to keep the current setting.  Please DO NOT change these settings.  There are guides lines on the front showing where the belt should run so it's obvious if it starts to track to the right and curl under which will grind the right roller and bed.  If this happens please STOP since the belt is just a large sheet of sandpaper and it will grind out the entire roller support and permanently damage the machine..
 


= SAFETY =
= SAFETY =

Revision as of 17:32, 22 February 2021

Shop Area: Woodshop

Tool: Drum Sander

Requires in-person training: Yes

Procedure Number

UG 110-01, Rev. 1

Date

1/10/2021

GENERAL

There are 2 lock bolts to the adjustment bolts to keep the current setting. Please DO NOT change these settings. There are guides lines on the front showing where the belt should run so it's obvious if it starts to track to the right and curl under which will grind the right roller and bed. If this happens please STOP since the belt is just a large sheet of sandpaper and it will grind out the entire roller support and permanently damage the machine..

SAFETY

REFERENCE

SuperMax 25x2 Manual

PROCEDURE

TROUBLESHOOTING

                                         END OF THE PROCEDURE