Cnc router maintenance and specifications: Difference between revisions
Jump to navigation
Jump to search
Aspontarelli (talk | contribs) |
Aspontarelli (talk | contribs) |
||
Line 74: | Line 74: | ||
=== Stepper Motors === | === Stepper Motors === | ||
X-motors: AXYZ PST341-3A Stepping motor. Voltage 1.45V, 5.0 Amps, 1.8 Deg. | |||
'''END OF PROCEDURE''' | '''END OF PROCEDURE''' |
Revision as of 14:04, 6 November 2021
Shop Area: Woodshop Tool: CNC Router Requires in-person training: Yes |
Procedure Number MT 110-08, Rev. 1 |
Date 1/26/2021 |
GENERAL
Specifications for the Phoenix-GS5 CNC router and the Shapeoko 2 CNC router.
REFERENCE
- E-stop configuration, https://www.youtube.com/watch?v=hVkNtq4C1F8
- Vacuum pump manual, https://usermanual.wiki/m/6172b69756810f1a013746a37ab528c1ca07c989d01f18765ef5a459c483cbe0.pdf
Maintenance
See Links
- Link to YouTube videos - https://www.bing.com/videos/search?q=Shapeoko+2+%e2%80%93+CNC&view=detail&mid=91AB54FF364A496A01E491AB54FF364A496A01E4&FORM=VIRE
- SheetCAM tutorials - https://arclightcnc.com/sheetcam-tutorials/
List of Specifications
Phoenix CNC Router
- KL-2200 Spindle: 3 phase, 2220 Watt, 400 hz
- MESA-7i85 encoder with MESA-7i84 daughtercard
- Gecko G320 servo drivers
- HY VFD, 240V
- Mesa-5i25 superport PCI card
- MEI M644 gantry servo motors
Bed Dimensions
X-axis: -0.175 to 47.5"
Y-axis: -0.25 to 47.5"
AXYZ CNC Router
Perske D68167 Spindle
7.7 HP spindle
PVL 270B Vacuum Pump
- 5.3 qt of DICREA 100 oil. Change every 500 hours
X2C Inverter
7i76e MESA controller
PACSCI 6410 stepper drivers
There are 4 total drivers. One for the Y-axis, two for the X-axis, and one for the Z-axis. https://www.electromate.com/pub/media/assets/catalog-library/pdfs/kollmorgen/Kollmorgen_6410_6415_Stepper_Drive_Catalog.pdf
DIP switch positions, described on pg C-10 of manual.
- Z1: DUUUUDDD
- X1: DUUUUDDD
- X2: DUUUUDDD
- Y1: DUDUUDDD
Stepper Motors
X-motors: AXYZ PST341-3A Stepping motor. Voltage 1.45V, 5.0 Amps, 1.8 Deg.
END OF PROCEDURE