Thickness planer training checklist

Shop Area: Woodshop Tool: Thickness Planner

Procedure Number TC 110-02, Rev. 0

Date DRAFT

GENERAL

Training to be completed prior to using the Thickness Planner - Dewalt Model DW735, 13 inch, three knife, two speed, powered by a 15 Amp motor.

SAFETY

See User Guide UG-110-08

REFERENCE

• See User Guide UG-110-02
• Maintenance and Specification MT-110-02
• Manual https://www.manualslib.com/manual/767856/Dewalt-Dw735.html
• Link to YouTube videos https://www.youtube.com/watch?v=P6gEBjzI0X8

LISTING

√ Indicates review completed

	Reviewed User Guide UG-110-02
	Understanding of safety requirements for operation of equipment
	Walk through set-up and operation guidelines
	Demonstrate how to obtain uniform wood thickness on parallel sides
	Discuss depth of cuts and series of cuts to get parallel sides
	Discuss planning narrow material, grouping several pieces together
	Discuss Troubleshooting areas
	Demonstrate proper cleaning after use

Training Completion:

Vector Space User: Date training completed:

Vector Space Trainer:

 

THIS IS THE END OF THE PROCEDURE