Pipe and tube bender maintenance and specifications

From vector-space.org
Revision as of 07:33, 31 December 2020 by Aspontarelli (talk | contribs) (Created page with "{| |width="33%"| '''Shop Area:''' Metal Shop '''Tool:''' Pipe and Tube Bender '''Requires in-person training:''' Yes  |width="33%"| '''Procedure Number''' MT 130-10, Rev....")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Shop Area: Metal Shop

Tool: Pipe and Tube Bender

Requires in-person training: Yes 

Procedure Number

MT 130-10, Rev. 0

Date

DRAFT

General

Di-acro Metal Fabrication Bender No. 2.

Reference

Maintenance

  • Keep machine surfaces clean and free of debris.
  • Periodically add grease in grease fitting.
  • Lubricate bearings per the table below via the Drive Fitting in the side of the Handle Arm Weldment with a NLGI GC-LB or SAE J310 grease per the lubrication guide, below.
  • To prevent corrosion in environments where the machine is used periodically, the top of the mounting plate, sliding surfaces of the handle and nose holder assemblies, and other nonlubricated bare metal surfaces may be protected with a suitable film coating such as paste wax, beeswax, Boeshield T-9, or similar.

Specifications

THIS IS THE END OF THE PROCEDURE

Retrieved from "https://vector-space.org/wiki/index.php?title=Pipe_and_tube_bender_maintenance_and_specifications&oldid=104"