Panel-saw: Difference between revisions
Jump to navigation
Jump to search
Aspontarelli (talk | contribs) |
Aspontarelli (talk | contribs) |
||
| Line 26: | Line 26: | ||
= PROCEDURE = | = PROCEDURE = | ||
=== Cross Cuts === | |||
# Depress the foot pedal to lock the gantry in place | |||
# Orient the saw blade vertically | |||
# Start the saw at the highest point and cut downward | |||
=== Rip Cuts === | |||
# Lift the foot pedal | |||
# Orient the saw horizontally | |||
# Set the height of the blade and lock it in place with the lock knob. | |||
# Start the saw at the left and cut to the right | |||
Latest revision as of 13:53, 13 May 2026
|
Shop Area: Woodshop Tool: Panel Saw Requires in-person training: Yes |
Procedure Number UG 110-12, Rev. 0 |
Date 5/13/2026 |
GENERAL
This is a Putsch Meniconi Univer Panel Saw, great for ripping and cross-cutting sheets of plywood up to 5 x 10'.
SAFETY
REFERENCE
- Univer Manual: Panel Saw user manual.pdf
PROCEDURE
Cross Cuts
- Depress the foot pedal to lock the gantry in place
- Orient the saw blade vertically
- Start the saw at the highest point and cut downward
Rip Cuts
- Lift the foot pedal
- Orient the saw horizontally
- Set the height of the blade and lock it in place with the lock knob.
- Start the saw at the left and cut to the right
END OF THE PROCEDURE