Tig welding maintenance and specifications: Difference between revisions
Jump to navigation
Jump to search
Aspontarelli (talk | contribs) Created page with "{| |width="33%"| '''Shop Area:''' Metal Shop '''Tool:''' TIG Welder '''Requires in-person training:''' Yes |width="33%"| '''Procedure Number''' MT 130-04, Rev. 0 |width..." |
No edit summary |
||
| Line 18: | Line 18: | ||
= General = | = General = | ||
[[File:TIG Alpha 200X Welder.png]] | |||
= Reference = | = Reference = | ||
| Line 43: | Line 43: | ||
** This welder allows you the versatility of welding various types of metal including aluminum. | ** This welder allows you the versatility of welding various types of metal including aluminum. | ||
''' | '''END OF THE PROCEDURE''' | ||
Revision as of 11:52, 5 February 2021
|
Shop Area: Metal Shop Tool: TIG Welder Requires in-person training: Yes |
Procedure Number MT 130-04, Rev. 0 |
Date DRAFT |
General
Reference
Maintenance
- Dust should be removed with dry and clean compressed air regularly. If the welder is used in a heavily polluted environment with smoke and polluted air, dust must be removed from the welder each month.
- The pressure of compressed air should be kept low so that damage is not done to the smaller components in the welder.
- Regularly check the connection of the electrical cord in the welder and make sure all other connections are secured.
- Welder needs to be stored and used away from water, dirt or dust.
Specifications
- Dimensions: 22″ x 20″ x 9″
- A duty cycle of 60% at 200A for TIG welding, and 35% at 155A for stick
- Input voltage: 110V/220V
- This welder adopts rectifiers designed with advanced inverter technology.
- The inverter TIG welding power uses high-power IGBTs to turn the working frequency of 50/60Hz to high frequency (20KHz or higher).
- Then voltage is reduced and current is regulated.
- This welder is a multi-purpose unit composed of DC pulse TIG welder and AC pulse TIG welder, and DC Stick welder (MMA).
- This welder allows you the versatility of welding various types of metal including aluminum.
END OF THE PROCEDURE