Eztrak cnc milling machine maintenance and specifications: Difference between revisions

From vector-space.org
Jump to navigation Jump to search

Aspontarelli (talk | contribs)

4 user groups
817 edits
VisualWikitext
Created page with "{| |width="33%"| '''Shop Area:''' Metal Shop '''Tool:''' EZTrak CNC Milling Machine '''Requires in-person training:''' Yes  |width="33%"| '''Procedure Number''' MT 130-07, Rev. 1 |width="33%"| '''Date''' 2/19/2021 |} = General = Tormach PCNC 440  File:Tormach PCNC 440.png = Reference = * [file://sites/default/files/um10372_pcnc440_manual_0819a_web.pdf Tormach PCNC 440 Operator Manual] * https://tormach.com/media/asset/4/4/440_spec-sheet_0519.pdf * https:/..."
 
 
(8 intermediate revisions by the same user not shown)
Line 7: Line 7:
'''Requires in-person training:''' Yes 
'''Requires in-person training:''' Yes 
|width="33%"|
|width="33%"|
'''Procedure Number'''


MT 130-07, Rev. 1
|width="33%"|
'''Date'''
'''Date'''


2/19/2021
10/27/2024
|}
|}


= General =
= General =


Tormach PCNC 440 
EZTrak CNC Milling Machine.


[[File:Tormach PCNC 440.png]]
= Reference =


= Reference =


* [file://sites/default/files/um10372_pcnc440_manual_0819a_web.pdf Tormach PCNC 440 Operator Manual]
* https://tormach.com/media/asset/4/4/440_spec-sheet_0519.pdf
* https://tormach.com/machines/mills/pcnc-440.html


= Maintenance =
= Maintenance =


[[File:CNC Maintenance schedule.png]]
 


= Specifications =
= Specifications =


'''<u>Performance and Cutting Ability</u>'''
Workspace: 29" x 11.25" x 15ish
 
The following table summarizes the cutting performance envelope of the PCNC 440 mill:
 
{|
|width="50%"| Spindle Speed Range
|width="50%"| 300-10,000 RPM
|-
| Spindle Power Rating
| 3/4 hp (600 W)
|-
| Feed Rate Range
|
0-135 IPM (X, Y)
 
0-110 IPM (Z)
|}
 
The PCNC 440 is capable of cutting any material that can be cut with a rotating cutter at or near its recommended feeds and speeds. As with any machine tool, care should be exercised so that programmed cuts do not exceed the maximum available spindle horsepower. Small diameter cutters may perform better with use of a companion spindle or RPM multiplier.
 
'''<u>Resolution, Accuracy, and Repeatability</u>'''
 
The following table summarizes resolution, accuracy, and repeatability of the PCNC 440 as delivered.
 
{|
| Resolution of Motion (minimum discrete positional move)
| 0.0001”
|-
| Positional Accuracy
| ≤ 0.0016” per 10”
|}
 
[[File:CNC Specs.png]]


[[File:CNC Specs Mechanical.png]]
Z-axis Motor: 42HS80-6004S


[[File:CNC PathPilot Specs.png]]
Z-axis stepper controller: Leadshine CS-D808


                                              '''END OF THE PROCEDURE'''
Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide. The tooth pitch is 3/8".

Latest revision as of 09:27, 11 March 2025

Shop Area: Metal Shop

Tool: EZTrak CNC Milling Machine

Requires in-person training: Yes 

Date

10/27/2024

General

EZTrak CNC Milling Machine.

Reference

Maintenance

Specifications

Workspace: 29" x 11.25" x 15ish

Z-axis Motor: 42HS80-6004S

Z-axis stepper controller: Leadshine CS-D808

Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide. The tooth pitch is 3/8".

Retrieved from "https://vector-space.org/wiki/index.php?title=Eztrak_cnc_milling_machine_maintenance_and_specifications&oldid=1824"