Pipe and tube bender maintenance and specifications: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 33: | Line 33: | ||
* To prevent corrosion in environments where the machine is used periodically, the top of the mounting plate, sliding surfaces of the handle and nose holder assemblies, and other nonlubricated bare metal surfaces may be protected with a suitable film coating such as paste wax, beeswax, Boeshield T-9, or similar. | * To prevent corrosion in environments where the machine is used periodically, the top of the mounting plate, sliding surfaces of the handle and nose holder assemblies, and other nonlubricated bare metal surfaces may be protected with a suitable film coating such as paste wax, beeswax, Boeshield T-9, or similar. | ||
[[File:Tube Bender.png]] | [[File:Tube Bender Lub.png]] | ||
= Specifications = | = Specifications = | ||
[[File:Tube Bender.png]] | [[File:Tube Bender Specs.png]] | ||
'''END OF THE PROCEDURE''' | '''END OF THE PROCEDURE''' | ||
Latest revision as of 15:32, 21 February 2021
|
Shop Area: Metal Shop Tool: Pipe and Tube Bender Requires in-person training: Yes |
Procedure Number MT 130-10, Rev. 1 |
Date 2/21/2021 |
General
Di-Acro Metal Fabrication Bender No. 2
Reference
Maintenance
- Keep machine surfaces clean and free of debris.
- Periodically add grease in grease fitting.
- Lubricate bearings per the table below via the Drive Fitting in the side of the Handle Arm Weldment with a NLGI GC-LB or SAE J310 grease per the lubrication guide, below.
- To prevent corrosion in environments where the machine is used periodically, the top of the mounting plate, sliding surfaces of the handle and nose holder assemblies, and other nonlubricated bare metal surfaces may be protected with a suitable film coating such as paste wax, beeswax, Boeshield T-9, or similar.
Specifications
END OF THE PROCEDURE