Aspontarelli: /* Specifications */

2022-11-14T18:31:07Z

Specifications

← Older revision		Revision as of 14:31, 14 November 2022
Line 79:		Line 79:

	= Specifications =		= Specifications =

			Light Bulb base: BA15d, 120V, 15W

	[[File:Viking Specs 1.png]]		[[File:Viking Specs 1.png]]

Kbogacik: Created page with "{| |width="33%"| '''Shop Area:''' Textiles '''Tool:''' Viking Sewing Machine '''Requires in-person training:''' Yes |width="33%"| '''Procedure Number''' MT 140-02, Rev. 1..."

2021-03-18T17:26:37Z

Created page with "{| |width="33%"| '''Shop Area:''' Textiles '''Tool:''' Viking Sewing Machine '''Requires in-person training:''' Yes |width="33%"| '''Procedure Number''' MT 140-02, Rev. 1..."

New page

{|
|width="33%"|
'''Shop Area:''' Textiles

'''Tool:''' Viking Sewing Machine

'''Requires in-person training:''' Yes
|width="33%"|
'''Procedure Number'''

MT 140-02, Rev. 1
|width="33%"|
'''Date'''

3/18/2021
|}

= General =

Husqvarna Viking Emerald 116

[[File:Viking Sewing Machine.png]]

= Reference =

User Manual https://vector-space.org/sites/default/files/emerald_122.pdf

= Maintenance =

'''Care and Maintenance'''

* Turn off the power switch.

* Clean the outside of the machine with a soft cloth and mild soap.

'''Cleaning the Hook Assembly area and Feed Teeth'''

[[File:Viking Cleaning Hook and Teeth.png]]

1. Remove the presser foot and needle
** Remove screw “a” on the left side of the needle plate.
** Remove the needle plate and take out the bobbin.

2. Lift up the bobbin case and remove it.

3. Brush out dust and lint.

4. Clean the feed teeth and hook assembly area with a brush.

5. Wipe out gently with a soft, dry cloth.

'''NOTE:''' You may also use a vacuum cleaner.

'''Replacing the Bobbin Case'''

[[File:Viking Replacing the Bobbin Case.png]]

Turn off the power switch.

1. Insert the bobbin case into the hook assembly area.

2. Make sure the knob of the bobbin case fits next to the stopper in the assembly area.

a. Knob

b. Stopper

3. Insert the bobbin.
* Replace the needle plate, inserting the two needle plate guide pins into the holes in the needle plate.
* Replace the screw

c. Guide holes

d. Screw

'''Replacing the Light Bulb'''

[[File:Viking Replacing the Light Bulb.png]]

= Specifications =

[[File:Viking Specs 1.png]]

[[File:Viking Specs 2.png]]

'''END OF THE PROCEDURE'''

Viking sewing machine maintenance and specifications - Revision history

Aspontarelli: /* Specifications */

Kbogacik: Created page with "{| |width="33%"| '''Shop Area:''' Textiles '''Tool:''' Viking Sewing Machine '''Requires in-person training:''' Yes |width="33%"| '''Procedure Number''' MT 140-02, Rev. 1..."