Table saw maintenance and specifications - Revision history

Aspontarelli: /* Reference */

2026-10-09T19:13:19Z

Reference

← Older revision		Revision as of 15:13, 9 October 2026
Line 27:		Line 27:
	= Reference =		= Reference =

	* Link to Instructions and Parts Manual [https://vector-space.org/wiki/~~File:~~M-PM231B_PM2000B_BT_Table_Saw_ED9.pdf PM2000 Table Saw Manual]		* Link to Instructions and Parts Manual [https://vector-space.org/wiki/images/3/31/M-PM231B_PM2000B_BT_Table_Saw_ED9.pdf PM2000 Table Saw Manual]
	* https://www.woodcraft.com/products/jet-xactasaw-deluxe-table-saw-3hp-1ph-50-rip?gclid=Cj0KCQiA2uH-BRCCARIsAEeef3mySTa69vTv_Vhu-fzCgKBm6Sx_6_2HxkXGwHv55VeE5P5t_QiOcEgaAmYHEALw_wcB#		* https://www.woodcraft.com/products/jet-xactasaw-deluxe-table-saw-3hp-1ph-50-rip?gclid=Cj0KCQiA2uH-BRCCARIsAEeef3mySTa69vTv_Vhu-fzCgKBm6Sx_6_2HxkXGwHv55VeE5P5t_QiOcEgaAmYHEALw_wcB#

Aspontarelli: /* Reference */

2026-10-09T19:13:05Z

Reference

← Older revision		Revision as of 15:13, 9 October 2026
Line 27:		Line 27:
	= Reference =		= Reference =

	* Link to Instructions and Parts Manual [https://vector-space.org/wiki/File:M-PM231B_PM2000B_BT_Table_Saw_ED9.pdf]		* Link to Instructions and Parts Manual [https://vector-space.org/wiki/File:M-PM231B_PM2000B_BT_Table_Saw_ED9.pdf PM2000 Table Saw Manual]
	*
	* https://www.woodcraft.com/products/jet-xactasaw-deluxe-table-saw-3hp-1ph-50-rip?gclid=Cj0KCQiA2uH-BRCCARIsAEeef3mySTa69vTv_Vhu-fzCgKBm6Sx_6_2HxkXGwHv55VeE5P5t_QiOcEgaAmYHEALw_wcB#		* https://www.woodcraft.com/products/jet-xactasaw-deluxe-table-saw-3hp-1ph-50-rip?gclid=Cj0KCQiA2uH-BRCCARIsAEeef3mySTa69vTv_Vhu-fzCgKBm6Sx_6_2HxkXGwHv55VeE5P5t_QiOcEgaAmYHEALw_wcB#

Aspontarelli: /* Reference */

2026-10-09T19:10:56Z

Reference

← Older revision		Revision as of 15:10, 9 October 2026
Line 27:		Line 27:
	= Reference =		= Reference =

	* Link to Instructions and Parts Manual ~~http~~://~~content~~.~~powermatic.com~~/~~manuals~~/~~1792000K_man~~.pdf		* Link to Instructions and Parts Manual [https://vector-space.org/wiki/File:M-PM231B_PM2000B_BT_Table_Saw_ED9.pdf]
	*		*
	* https://www.woodcraft.com/products/jet-xactasaw-deluxe-table-saw-3hp-1ph-50-rip?gclid=Cj0KCQiA2uH-BRCCARIsAEeef3mySTa69vTv_Vhu-fzCgKBm6Sx_6_2HxkXGwHv55VeE5P5t_QiOcEgaAmYHEALw_wcB#		* https://www.woodcraft.com/products/jet-xactasaw-deluxe-table-saw-3hp-1ph-50-rip?gclid=Cj0KCQiA2uH-BRCCARIsAEeef3mySTa69vTv_Vhu-fzCgKBm6Sx_6_2HxkXGwHv55VeE5P5t_QiOcEgaAmYHEALw_wcB#

Aspontarelli: /* General */

2026-10-09T19:10:24Z

General

← Older revision		Revision as of 15:10, 9 October 2026
Line 24:		Line 24:
	[[File:Screenshot 2021-01-14 093448.png]]		[[File:Screenshot 2021-01-14 093448.png]]

	~~'''Jet Table Saw'''~~

	~~Item 837474 Model 708675PK~~

	~~Jet - 3HP 1PH 230V XACTASAW Deluxe Table Saw with 50" Rip Capacity~~

	~~[[File:Screenshot 2021-01-14 094901.png]]~~

	= Reference =		= Reference =

Aspontarelli: /* Reference */

2026-10-09T19:06:55Z

Reference

← Older revision		Revision as of 15:06, 9 October 2026
Line 35:		Line 35:

	* Link to Instructions and Parts Manual http://content.powermatic.com/manuals/1792000K_man.pdf		* Link to Instructions and Parts Manual http://content.powermatic.com/manuals/1792000K_man.pdf
	* ~~Link to Jet https://www.woodcraft.com/media/W1siZiIsIjIwMjAvMDMvMTQvMDAvNTEvMTcvNTkvODM3NDc0LkpldC5YQUNUQWgucGRmIl1d/837474.Jet.XACTAh.pdf?sha=1db8234d267f663e~~		*
	* https://www.woodcraft.com/products/jet-xactasaw-deluxe-table-saw-3hp-1ph-50-rip?gclid=Cj0KCQiA2uH-BRCCARIsAEeef3mySTa69vTv_Vhu-fzCgKBm6Sx_6_2HxkXGwHv55VeE5P5t_QiOcEgaAmYHEALw_wcB#		* https://www.woodcraft.com/products/jet-xactasaw-deluxe-table-saw-3hp-1ph-50-rip?gclid=Cj0KCQiA2uH-BRCCARIsAEeef3mySTa69vTv_Vhu-fzCgKBm6Sx_6_2HxkXGwHv55VeE5P5t_QiOcEgaAmYHEALw_wcB#

Kbogacik: /* Maintenance */

2021-01-24T16:51:24Z

Maintenance

← Older revision		Revision as of 12:51, 24 January 2021
Line 85:		Line 85:

	To install or replace a blade (refer to Figure 6), 27mm Wrench is needed.		To install or replace a blade (refer to Figure 6), 27mm Wrench is needed.

			[[File:Jet Planner Adjustment Fig 6.png]]

	1. Disconnect machine from power source.		1. Disconnect machine from power source.

Kbogacik at 16:46, 24 January 2021

2021-01-24T16:46:35Z

← Older revision		Revision as of 12:46, 24 January 2021
Line 7:		Line 7:
	'''Procedure Number'''		'''Procedure Number'''

	MT 110-03, Rev. 0		MT 110-03, Rev. 1
	\|width="33%"\|		\|width="33%"\|
	'''Date'''		'''Date'''

	~~DRAFT~~		1/24/2021
	\|}		\|}

Kbogacik: /* Maintenance */

2021-01-24T16:45:31Z

Maintenance

← Older revision		Revision as of 12:45, 24 January 2021
Line 44:		Line 44:
	Note: The following maintenance schedule assumes the saw is being used every day.		Note: The following maintenance schedule assumes the saw is being used every day.

	Daily:		'''Daily:'''

	• Wipe down the table surface and grooves with a rust preventive.		• Wipe down the table surface and grooves with a rust preventive.
Line 50:		Line 50:
	• Clean the pitch and resin from the saw blade.		• Clean the pitch and resin from the saw blade.

	Weekly:		'''Weekly:'''

	• Table surface must be kept clean and free of rust for best results. Apply a coat of paste wax to the surface to facilitate this. An alternative is to apply white talcum powder, rubbed in vigorously once a week with a blackboard eraser; this will fill casting pores and form a moisture barrier. This method provides a table top that is slick and allows rust rings to be easily wiped from the surface. Important also is the fact that talcum powder will not stain wood or mar finishes as wax pickup does.		• Table surface must be kept clean and free of rust for best results. Apply a coat of paste wax to the surface to facilitate this. An alternative is to apply white talcum powder, rubbed in vigorously once a week with a blackboard eraser; this will fill casting pores and form a moisture barrier. This method provides a table top that is slick and allows rust rings to be easily wiped from the surface. Important also is the fact that talcum powder will not stain wood or mar finishes as wax pickup does.
Line 58:		Line 58:
	• Wipe down the fence rails with a dry silicon lubricant.		• Wipe down the fence rails with a dry silicon lubricant.

	Periodic:		'''Periodic:'''

	• Keep the inside of the cabinet and trunnion area clean.		• Keep the inside of the cabinet and trunnion area clean.

Kbogacik: /* Reference */

2021-01-24T16:44:31Z

Reference

← Older revision		Revision as of 12:44, 24 January 2021
Line 37:		Line 37:
	* Link to Jet https://www.woodcraft.com/media/W1siZiIsIjIwMjAvMDMvMTQvMDAvNTEvMTcvNTkvODM3NDc0LkpldC5YQUNUQWgucGRmIl1d/837474.Jet.XACTAh.pdf?sha=1db8234d267f663e		* Link to Jet https://www.woodcraft.com/media/W1siZiIsIjIwMjAvMDMvMTQvMDAvNTEvMTcvNTkvODM3NDc0LkpldC5YQUNUQWgucGRmIl1d/837474.Jet.XACTAh.pdf?sha=1db8234d267f663e
	* https://www.woodcraft.com/products/jet-xactasaw-deluxe-table-saw-3hp-1ph-50-rip?gclid=Cj0KCQiA2uH-BRCCARIsAEeef3mySTa69vTv_Vhu-fzCgKBm6Sx_6_2HxkXGwHv55VeE5P5t_QiOcEgaAmYHEALw_wcB#		* https://www.woodcraft.com/products/jet-xactasaw-deluxe-table-saw-3hp-1ph-50-rip?gclid=Cj0KCQiA2uH-BRCCARIsAEeef3mySTa69vTv_Vhu-fzCgKBm6Sx_6_2HxkXGwHv55VeE5P5t_QiOcEgaAmYHEALw_wcB#
	*

	= Maintenance =		= Maintenance =

Kbogacik: /* List of Specifications */

2021-01-24T16:44:03Z

List of Specifications

← Older revision		Revision as of 12:44, 24 January 2021
Line 203:		Line 203:


	'''~~THIS IS THE~~ END OF THE PROCEDURE'''		'''END OF THE PROCEDURE'''