Eztrak cnc milling machine maintenance and specifications - Revision history

Aspontarelli: /* Specifications */

2025-03-11T13:27:27Z

Specifications

← Older revision		Revision as of 09:27, 11 March 2025
Line 27:		Line 27:
	= Specifications =		= Specifications =

	Workspace: 29" x 11.25" x ~~20ish~~		Workspace: 29" x 11.25" x 15ish

	Z-axis Motor: 42HS80-6004S		Z-axis Motor: 42HS80-6004S

Aspontarelli: /* Specifications */

2025-03-11T13:24:24Z

Specifications

← Older revision		Revision as of 09:24, 11 March 2025
Line 30:		Line 30:

	Z-axis Motor: 42HS80-6004S		Z-axis Motor: 42HS80-6004S

	Z-axis stepper controller: Leadshine CS-D808		Z-axis stepper controller: Leadshine CS-D808

	Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide. The tooth pitch is 3/8".		Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide. The tooth pitch is 3/8".

Aspontarelli: /* Specifications */

2025-03-11T13:24:17Z

Specifications

← Older revision		Revision as of 09:24, 11 March 2025
Line 30:		Line 30:

	Z-axis Motor: 42HS80-6004S		Z-axis Motor: 42HS80-6004S
			Z-axis stepper controller: Leadshine CS-D808

	Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide. The tooth pitch is 3/8".		Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide. The tooth pitch is 3/8".

Aspontarelli: /* Specifications */

2024-12-15T18:42:48Z

Specifications

← Older revision		Revision as of 14:42, 15 December 2024
Line 28:		Line 28:

	Workspace: 29" x 11.25" x 20ish		Workspace: 29" x 11.25" x 20ish

			Z-axis Motor: 42HS80-6004S

	Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide. The tooth pitch is 3/8".		Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide. The tooth pitch is 3/8".

Aspontarelli: /* Specifications */

2024-12-15T15:18:28Z

Specifications

← Older revision		Revision as of 11:18, 15 December 2024
Line 26:		Line 26:

	= Specifications =		= Specifications =

			Workspace: 29" x 11.25" x 20ish

	Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide. The tooth pitch is 3/8".		Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide. The tooth pitch is 3/8".

Aspontarelli: /* Specifications */

2024-12-13T11:50:51Z

Specifications

← Older revision		Revision as of 07:50, 13 December 2024
Line 27:		Line 27:
	= Specifications =		= Specifications =

	Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide.		Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide. The tooth pitch is 3/8".

Aspontarelli: /* Specifications */

2024-10-27T12:30:49Z

Specifications

← Older revision		Revision as of 08:30, 27 October 2024
Line 27:		Line 27:
	= Specifications =		= Specifications =

			Z-axis belt: 300L050. 300 is the length in tenths of an inch. L is for light industrial and 050 means it's 1/2 inch wide.

	~~'''END OF THE PROCEDURE''~~'

Aspontarelli: /* General */

2024-10-27T12:30:04Z

General

← Older revision		Revision as of 08:30, 27 October 2024
Line 16:		Line 16:

	EZTrak CNC Milling Machine.		EZTrak CNC Milling Machine.

	~~[[File:Tormach PCNC 440.png]]~~

	= Reference =		= Reference =

Aspontarelli at 12:29, 27 October 2024

2024-10-27T12:29:57Z

← Older revision		Revision as of 08:29, 27 October 2024
Line 7:		Line 7:
	'''Requires in-person training:''' Yes		'''Requires in-person training:''' Yes
	\|width="33%"\|		\|width="33%"\|
	~~'''Procedure Number'''~~

	~~MT 130-07, Rev. 1~~
	~~\|width="33%"\|~~
	'''Date'''		'''Date'''

	2/19/~~2021~~		10/27/2024
	\|}		\|}

	= General =		= General =

	~~Tormach PCNC 440~~		EZTrak CNC Milling Machine.

	[[File:Tormach PCNC 440.png]]		[[File:Tormach PCNC 440.png]]
Line 24:		Line 21:
	= Reference =		= Reference =

	* [file://sites/default/files/um10372_pcnc440_manual_0819a_web.pdf Tormach PCNC 440 Operator Manual]
	* https://tormach.com/media/asset/4/4/440_spec-sheet_0519.pdf
	* https://tormach.com/machines/mills/pcnc-440.html

	= Maintenance =		= Maintenance =

	~~[[File:CNC Maintenance schedule.png]]~~

	= Specifications =		= Specifications =

	~~'''<u>Performance and Cutting Ability</u>'''~~

	~~The following table summarizes the cutting performance envelope of the PCNC 440 mill:~~

	{\|
	~~\|width="50%"\| Spindle Speed Range~~
	~~\|width="50%"\| 300-10,000 RPM~~
	\|-
	~~\| Spindle Power Rating~~
	~~\| 3/4 hp (600 W)~~
	\|-
	~~\| Feed Rate Range~~
	\|
	~~0-135 IPM (X, Y)~~

	~~0-110 IPM (Z)~~
	\|}

	The PCNC 440 is capable of cutting any material that can be cut with a rotating cutter at or near its recommended feeds and speeds. As with any machine tool, care should be exercised so that programmed cuts do not exceed the maximum available spindle horsepower. Small diameter cutters may perform better with use of a companion spindle or RPM multiplier.

	~~'''<u>Resolution, Accuracy, and Repeatability</u>'''~~

	~~The following table summarizes resolution, accuracy, and repeatability of the PCNC 440 as delivered.~~

	{\|
	~~\| Resolution of Motion (minimum discrete positional move)~~
	~~\| 0.0001”~~
	\|-
	~~\| Positional Accuracy~~
	~~\| ≤ 0.0016” per 10”~~
	\|}

	~~[[File:CNC Specs.png]]~~

	~~[[File:CNC Specs Mechanical.png]]~~

	~~[[File:CNC PathPilot Specs.png]]~~

	'''END OF THE PROCEDURE'''		'''END OF THE PROCEDURE'''

Aspontarelli: Created page with "{| |width="33%"| '''Shop Area:''' Metal Shop '''Tool:''' EZTrak CNC Milling Machine '''Requires in-person training:''' Yes |width="33%"| '''Procedure Number''' MT 130-07, Rev. 1 |width="33%"| '''Date''' 2/19/2021 |} = General = Tormach PCNC 440 File:Tormach PCNC 440.png = Reference = * [file://sites/default/files/um10372_pcnc440_manual_0819a_web.pdf Tormach PCNC 440 Operator Manual] * https://tormach.com/media/asset/4/4/440_spec-sheet_0519.pdf * https:/..."

2024-10-27T12:26:45Z

Created page with "{| |width="33%"| '''Shop Area:''' Metal Shop '''Tool:''' EZTrak CNC Milling Machine '''Requires in-person training:''' Yes |width="33%"| '''Procedure Number''' MT 130-07, Rev. 1 |width="33%"| '''Date''' 2/19/2021 |} = General = Tormach PCNC 440 File:Tormach PCNC 440.png = Reference = * [file://sites/default/files/um10372_pcnc440_manual_0819a_web.pdf Tormach PCNC 440 Operator Manual] * https://tormach.com/media/asset/4/4/440_spec-sheet_0519.pdf * https:/..."

New page

{|
|width="33%"|
'''Shop Area:''' Metal Shop

'''Tool:''' EZTrak CNC Milling Machine

'''Requires in-person training:''' Yes
|width="33%"|
'''Procedure Number'''

MT 130-07, Rev. 1
|width="33%"|
'''Date'''

2/19/2021
|}

= General =

Tormach PCNC 440

[[File:Tormach PCNC 440.png]]

= Reference =

* [file://sites/default/files/um10372_pcnc440_manual_0819a_web.pdf Tormach PCNC 440 Operator Manual]
* https://tormach.com/media/asset/4/4/440_spec-sheet_0519.pdf
* https://tormach.com/machines/mills/pcnc-440.html

= Maintenance =

[[File:CNC Maintenance schedule.png]]

= Specifications =

'''<u>Performance and Cutting Ability</u>'''

The following table summarizes the cutting performance envelope of the PCNC 440 mill:

{|
|width="50%"| Spindle Speed Range
|width="50%"| 300-10,000 RPM
|-
| Spindle Power Rating
| 3/4 hp (600 W)
|-
| Feed Rate Range
|
0-135 IPM (X, Y)

0-110 IPM (Z)
|}

The PCNC 440 is capable of cutting any material that can be cut with a rotating cutter at or near its recommended feeds and speeds. As with any machine tool, care should be exercised so that programmed cuts do not exceed the maximum available spindle horsepower. Small diameter cutters may perform better with use of a companion spindle or RPM multiplier.

'''<u>Resolution, Accuracy, and Repeatability</u>'''

The following table summarizes resolution, accuracy, and repeatability of the PCNC 440 as delivered.

{|
| Resolution of Motion (minimum discrete positional move)
| 0.0001”
|-
| Positional Accuracy
| ≤ 0.0016” per 10”
|}

[[File:CNC Specs.png]]

[[File:CNC Specs Mechanical.png]]

[[File:CNC PathPilot Specs.png]]

'''END OF THE PROCEDURE'''