Brother industrial sewing machine maintenance and specifications - Revision history

Kbogacik: /* Maintenance */

2021-03-17T14:26:14Z

Maintenance

← Older revision		Revision as of 10:26, 17 March 2021
Line 32:		Line 32:
	= Maintenance =		= Maintenance =

	~~‘’’CLEANING’’’~~		'''CLEANING'''

	• Turn off the power switch before carrying out cleaning.		• Turn off the power switch before carrying out cleaning.
Line 38:		Line 38:
	• Be sure to wear protective goggles and gloves when handling the lubricating oil and grease.		• Be sure to wear protective goggles and gloves when handling the lubricating oil and grease.

	~~‘’’Daily~~ cleaning ~~procedures’’’~~		'''Daily cleaning procedures'''

	The following cleaning operations should be carried out each day in order to maintain the performance of this machine and to ensure a long service life. If the sewing machine has not been used for a long period of time, carry out the following cleaning procedures before using it again.		The following cleaning operations should be carried out each day in order to maintain the performance of this machine and to ensure a long service life. If the sewing machine has not been used for a long period of time, carry out the following cleaning procedures before using it again.
Line 62:		Line 62:
	[[File:Cleaning.png]]		[[File:Cleaning.png]]

	~~‘’’Lubrication’’’~~		'''Lubrication'''

	~~‘’’A~~. Gearbox oil ~~quantity’’’~~		'''A. Gearbox oil quantity'''

	* Check the quantity of oil in the gearbox immediately after tilting back the machine head. When the machine head is left for long periods in the tilted-back position, the amount of oil in the felt inside the gearbox drops and the oil level seen from the oil window (1) rises, so that it becomes impossible to measure the actual oil level accurately.		* Check the quantity of oil in the gearbox immediately after tilting back the machine head. When the machine head is left for long periods in the tilted-back position, the amount of oil in the felt inside the gearbox drops and the oil level seen from the oil window (1) rises, so that it becomes impossible to measure the actual oil level accurately.
	* The position of the oil level in the oil window (1) will vary depending on the angle of the machine head. Tilt back the machine head while the head rest (2) is installed in the correct position.		* The position of the oil level in the oil window (1) will vary depending on the angle of the machine head. Tilt back the machine head while the head rest (2) is installed in the correct position.

	~~‘’’~~<Checking the oil quantity>~~’’’~~		'''<Checking the oil quantity>'''

	The oil level should normally be approximately 1 mm above the center reference line in the oil window (1).		The oil level should normally be approximately 1 mm above the center reference line in the oil window (1).
Line 77:		Line 77:
	2. If the oil level is below the normal level, add more lubricating oil as described in the following procedure.		2. If the oil level is below the normal level, add more lubricating oil as described in the following procedure.

	~~‘’’~~<Lubrication>~~’’’~~		'''<Lubrication>'''

	1. Remove the rubber cap (3).		1. Remove the rubber cap (3).
Line 89:		Line 89:
	[[File:Lube 1.png]]		[[File:Lube 1.png]]

	~~‘’’B~~. Oil tank oil ~~quantity’’’~~		'''B. Oil tank oil quantity'''

	Check the oil gauge window (1), and add more oil if the oil gauge (2) is below the lower reference line.		Check the oil gauge window (1), and add more oil if the oil gauge (2) is below the lower reference line.
Line 95:		Line 95:
	[[File:Lube 2.png]]		[[File:Lube 2.png]]

	~~‘’’Checking’’’~~		'''Checking'''

	1. Replace the needle if it is bent or if the tip is broken.		1. Replace the needle if it is bent or if the tip is broken.
Line 105:		Line 105:
	[[File:Lube 3.png]]		[[File:Lube 3.png]]

	~~‘’’Applying~~ grease (When “GREASEUP” appears)~~’’’~~		'''Applying grease (When “GREASEUP” appears)'''

	If “GREASEUP" flashes on the main display (1) and a buzzer sounds when the power switch is turned on, it means that		If “GREASEUP" flashes on the main display (1) and a buzzer sounds when the power switch is turned on, it means that
Line 111:		Line 111:
	Apply grease as required, while referring to the following for details.		Apply grease as required, while referring to the following for details.

	~~‘’’~~<To continue sewing without applying grease>~~’’’~~		'''<To continue sewing without applying grease>'''

	1. Press the RESET key (2).		1. Press the RESET key (2).
Line 122:		Line 122:
	• If you continue to use the sewing machine after the “GREASEUP” notification appears without applying grease (or without carrying out the reset procedure), “Err100” will appear after a certain period of time and the sewing machine will be forcibly prevented from operating for safety reasons. If this happens, apply grease and carry out the reset procedure.		• If you continue to use the sewing machine after the “GREASEUP” notification appears without applying grease (or without carrying out the reset procedure), “Err100” will appear after a certain period of time and the sewing machine will be forcibly prevented from operating for safety reasons. If this happens, apply grease and carry out the reset procedure.

	~~‘’’~~<Applying grease>~~’’’~~		'''<Applying grease>'''

	[[File:Lube 4.png]]		[[File:Lube 4.png]]
Line 140:		Line 140:
	7. Carry out the reset procedure given below.		7. Carry out the reset procedure given below.

	~~‘’’~~<Resetting the cumulative operating time>~~’’’~~		'''<Resetting the cumulative operating time>'''

	After the grease has been applied, carry out the following procedure to reset the cumulative time between grease applications.		After the grease has been applied, carry out the following procedure to reset the cumulative time between grease applications.

Kbogacik: /* Specifications */

2021-03-17T14:20:17Z

Specifications

← Older revision		Revision as of 10:20, 17 March 2021
Line 155:		Line 155:

	= Specifications =		= Specifications =

			[[File:Maintenance 1.png]]

			[[File:Maintenance 2.png]]

	'''END OF THE PROCEDURE'''		'''END OF THE PROCEDURE'''

Kbogacik: /* Maintenance */

2021-03-17T14:19:53Z

Maintenance

← Older revision		Revision as of 10:19, 17 March 2021
Line 31:		Line 31:

	= Maintenance =		= Maintenance =

	~~[[File:Maintenance 1.png]]~~

	~~[[File:Maintenance 2.png]]~~

	‘’’CLEANING’’’		‘’’CLEANING’’’

Kbogacik: /* Maintenance */

2021-03-16T18:31:46Z

Maintenance

@@ Line 36: / Line 36: @@
 [[File:Maintenance 2.png]]
 = Specifications =
                                              '''END OF THE PROCEDURE'''

Kbogacik: Created page with "{| |width="33%"| '''Shop Area:''' Textiles '''Tool:''' Brother Industrial Sewing Machine '''Requires in-person training:''' Yes |width="33%"| '''Procedure Number''' MT 140..."

2021-03-16T18:07:44Z

Created page with "{| |width="33%"| '''Shop Area:''' Textiles '''Tool:''' Brother Industrial Sewing Machine '''Requires in-person training:''' Yes |width="33%"| '''Procedure Number''' MT 140..."

New page

{|
|width="33%"|
'''Shop Area:''' Textiles

'''Tool:''' Brother Industrial Sewing Machine

'''Requires in-person training:''' Yes
|width="33%"|
'''Procedure Number'''

MT 140-01, Rev. 1
|width="33%"|
'''Date'''

3/16/2021
|}

= General =

Brother Industrial Sewing Machine Model 7200

[[File:Brother Sewing Machine.png]]

SINGLE NEEDLE DIRECT DRIVE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER

= Reference =

'''Instruction Manual:'''

https://www.brothercom.ro/docs/2-Partsbook%20-%20carti%20piese%20de%20schimb/Seria%20BROTHER%20B700/S7200A/S-7200A%20instruction%20manual.pdf

= Maintenance =

[[File:Maintenance 1.png]]

[[File:Maintenance 2.png]]

= Specifications =

'''END OF THE PROCEDURE'''